Atlanta and North Georgia since 1925

 
 

NO MORE MUSHROOMS! The TrapEase Composite Deck Screw is specially designed to eliminate the “mushrooming” effect caused by standard deck screws in composite deck materials.

  • Oversized top thread traps most loose composite material during installation
  • Concave underside of the head conceals any loose material for clean appearance
  • Guaranteed corrosive resistant coating. ACQ approved
  • Bottom thread and point designed for maximum pull-down power
  • Deep #2 square-drive provides the best bit engagement, reducing cam-out
In case you want to go "Old School" we still have a wide range of hand drive nails.
Purchase a pound at a time or a 30 lb. case, Lummus Supply is your nail connection.
Paslode- Nailing Preformance!

Brite 30º Framing Nails

New and Improved!

  • New, reinforced round head design for
    BETTER DRIVE PERFORMANCE in the hardest materials
  • 10% more nails per strip means
    LESS RELOADING
  • Rigid and compact strips are
    MORE DURABLE and easier to handle

30º Round Head Nails

Part #

Length

Dia.

Shank

Finish

#/Box

650272

2"

.113"

Smooth

Brite

5,500

650273

2"

.113"

Ring

Brite

5,500

405253

2 1/2"

.131"

Smooth

Brite

3,000

650434

2 3/8"

.113"

Ring

Brite

500

650603

2 3/8"

.113"

Ring

Brite

2,000

650604

2 3/8"

.113"

Smooth

Brite

2,000

650237

2 3/8"

.113"

Smooth

Brite

5,000

650238

2 3/8"

.113"

Ring

Brite

5,000

650236

3"

.120"

Smooth

Brite

2,500

650210

3"

.131"

Smooth

Brite

2,500

650436

3 1/4"

.131"

Smooth

Brite

500

650239

3 1/4"

.131"

Smooth

Brite

2,500

16 Gauge Galvanized Straight Finish Nails

  • Chisel point reduces wood splitting
  • Smaller 16 gauge nail hole is ideal for any finish work
  • Available in 1 1/4"- 2 1/2" nail range.

 

Also available in angled version.
Strong-Drive®SDW Structural Wood Screws

 The Strong-Drive® SDW screw is a 0.22" diameter, high-strength structural wood screw specifically designed for fastening multi-ply wood members such as plated trusses, engineered-lumber products and solid-sawn lumber. The SDW installs easily with no pre-drilling and is available in optimized lengths for fastening 2, 3 and 4-ply trusses or 1 3/4" engineered lumber such as structural composite lumber (SCL). The SDW enables single-side fastening, while still allowing concurrent loading on both sides of the assembly to the full allowable head or tip-side load of the fastener.
 
Available in 3 3/8" , 5" and 6 3/4" lenghts
Quik Drive auto-feed screw driving systems are ideal for subfloor installation because they combine the efficiency of stand-up driving with the holding power of screws. Screws are superior to nails in this application because they reduce the gaps that cause floor squeaks.
  • Recommended for wood and steel framing
  • Fasten 2,000 sq ft in just over an hour
  • Systems warn when screw misses the joist – screw head spins rather than seating and disengaging the driver bit

 

Lenghts available up to 2 1/2"
Grip-Rite® PrimeGuard Plus® fasteners are the first and only fasteners to pass Rust-Oleum's rigorous rust and corrosion testing standards. Rust-Oleum has been trusted by America for protection against rust since 1921. Now that trusted protection extends to PrimeGuard Plus fasteners.
Every fastener in the PrimeGuard Plus line carries a lifetime guarantee against rust and corrosion.
PrimeGuard Plus fasteners were tested using the most thorough methods recognized by fastener manufacturers and wood treaters worldwide. PrimeGuard Plus fasteners performed better when tested side by side against other nationally recognized brands' coatings, including double hot-dipped galvanized.
"After the last of 16 mounting screws has been removed from an access cover, it will be discovered that the wrong access cover has been removed."
-De La Lastra's Law